|
IICT Enterprises LLC IICT Training & Productions PO Box 20623 Bloomington MN 55420 PH 952-881-1637 ~ 612-387-6310 ~ FAX 952-881-4419 |
|
Rockwell Hardness or Rockwell Superficial Hardness Tester .ASTM E18
Brinnell Hardness Tester................ASTM E10
Environmental Conditions..............ANSI/ASME B89.6.2
Webster hardness Tester...............Manufacturer
Straight Edge.................................Navair 17-20MD-02
Male Luer Slip Fitting.....................ANSI/HIMA MD70.1
ANS Pipe Thread............................ANSI/ASME B1.20.1
Dryseal Pipe Threads.....................ASME B1.20.5
"MikeMaster" or "Kalmaster" (Size Control Company) ......Manufacturer for tolerances
Surface Finish Roughness Standard..ANSI/ASME B46.1
Force gage.......................................Navair 17-20MF-04
Buttress Screw threads...................ANSI B1.9
Magnetic thickness Gage.................ASTM A 153-61; ASTM A 368-61; ISO 2178; DIN 50981; DIN 50982
Durometer.......................................ASTM D 2240
ANPT Threads..................................MIL-P-7105B
Spline Gages..............................Manufacturer for tolerances
CMM...........................................Manufacturer
Optical Comparator....................Manufacturer
Top Loading Laboratory Scales & Balances ASTM E898-88
Surface Plate GGG-P-463C
Torque Wrench ASME-B107.14M
There are some cases where you may have to combine tools such as manufacturers tolerances with Machinery's Handbook or other source for proper procedure.
If you follow manufacturers recommended calibration procedure you must have a copy of the procedure.
This is only a very small list. There are other standards and may be more than one for certain type of tools. I hope it will help somewhat. Remember, It is your responsibility to make sure that you have the latest standard issued. |
|
Training the Best to Meet the needs of the new millennium |
|
STATEMENT |